Insight

One atomic statement made by an expert, a student or a publication, with its evidence status.

Expert Open for expert review · What do these labels mean?

Concrete supports are heavy, stick hard and must be hammered off; thin plastic-style support columns would collapse under concrete, and 3D support structures would consume large amounts of material. Alternatives are lightweight filler balls or printing inside a large box of sand — but sand is heavy enough to deform overhangs under its own weight, and removed fillers leave material stuck to the top layer.

— Paraphrased from the lecture

Where in the source~40:46–43:41 — anchor: “very difficult to remove the supports afterwards”
Confidencecheck — the named sand-printed reference is garbled

Context

A student asked whether Vele (CTU Prague / Scoolpt) had experimented with printing a support first and then printing on top of it. He compares supports in concrete and plastic printing and mentions a structure printed in a box of sand; its name is garbled in the transcript (‘Botistavka’).

From the transcript

The issue with supports in concrete is that concrete is very heavy and very, very difficult to remove the supports afterwards. So it really likes to stick to each other. […] in the plastic you have like these small columns and then you bridge them with the layer which serves as a support. But in concrete, if you would just scale up this idea, it wouldn’t work because the thin structures for supports would collapse with concrete as well. So you would need to use some kind of 3D structures which would already consume a lot of concrete. And then you would have to like do a lot of hammering. […] You can see that there are like these small balls. They are quite light. So you can like pour them inside and they can hold the desired shape quite well. Sometimes even sand is used. […] The issue with sand is that it’s kind of heavy and if you print like big overhangs, the sand pressures the material and can sometimes [deform it] just by its own weight. So sometimes better to use like these lightweight things. — (Q&A) the top layer sticks to the concrete. It’s kind of sticky.

Automatic transcript, Q&A, 00:40:46. Lightly cleaned: repeated words and fillers removed, omissions marked […], editorial insertions in [brackets].

Transcription

The number or wording may have been garbled in the transcript, or the speaker hedged it (the named sand-printed reference is garbled). To be checked against the recording.

Connections


Something wrong or missing? Suggest a correction