Insight
One atomic statement made by an expert, a student or a publication, with its evidence status.
Expert Open for expert review · What do these labels mean?
The original design was a free-form living-organism shape; after test prints it was reduced so only the two walls were 3D printed and the top room built in wood. Overhangs at the elliptical window had to be propped by foam layers stacked by hand.
— Paraphrased from the lecture
| Where in the source | ~16:50 — anchor: “we ended up with much simplified design” |
| Confidence | high |
Context
Vele (CTU Prague / Scoolpt) tells how the design of Prvok changed. The founder of the company had drawn it as a living organism resembling a protozoan (hence the Czech name Prvok), but test prints of its sections kept collapsing where the curve was too steep or the wall too flat.
From the transcript
He drew this beautiful kind of like a living organism, which looked like a protozoa. […] So in the end when we did these several testing grounds, we ended up with much simplified design. And you can see that in the final section only these two like the walls were 3D printed and the top room was made of wood. […] Please do notice this part. It’s an elliptic window which at the top where you have like these layers that are stacking on top of each other and slightly like overlapping and then creating an overhang. We had to support it somehow because when you are printing it’s liquid so it would like fall down directly. So we put a [slew] of foam layers and put them on top of each other to avoid the layers to collapse. This was done manually and it was kind of annoying, but in the end we succeeded.
Automatic transcript, presentation, 00:15:32–00:18:03. Lightly cleaned: repeated words and fillers removed, omissions marked […], editorial insertions in [brackets].
Connections
Something wrong or missing? Suggest a correction