Insight

One atomic statement made by an expert, a student or a publication, with its evidence status.

Expert Open for expert review · What do these labels mean?

What is printed is a cementitious mixture, far more expensive than ordinary concrete, that can solidify within minutes because of accelerant chemistry. The visibly darker top three or four layers are still wet; the greyish ones below have already started gaining strength.

— Paraphrased from the lecture

Where in the source~13:20 — anchor: “it’s not exactly concrete”
Confidencehigh

Context

Jiří Vele (Faculty of Architecture CTU Prague / co-founder of the concrete 3D-printing company Scoolpt) opens the lecture with a short introduction to the printing setup: an industrial robot with a nozzle, a hose, a pump and a mixer. He then explains what the material coming out of the nozzle actually is.

From the transcript

This material, sometimes it’s referred to [as] concrete, but it’s not exactly concrete. It’s a cementitious material. There are some differences. The most important one is that this mixture is way more expensive than the regular concrete. And when you mix it with water, it can solidify in a matter of minutes. So there are many chemicals like accelerants which make the setting very fast. So when you deposit the material, you can see how the top three or 4 layers are kind of darker. That’s because they are wet. But the layers below are already greyish. And that’s because the chemical reaction already kicked in and started [to gain] strength and started to solidify, which is very important when you are sticking so many layers on top of each other […]

Automatic transcript, presentation, 00:13:20. Lightly cleaned: repeated words and fillers removed, omissions marked […], editorial insertions in [brackets].

Connections


Something wrong or missing? Suggest a correction